§42-222.
Industrial Zoning District
The following sign regulations shall apply in Industrial Districts.
A.
Freestanding Signs. 
(1)
Sign Type. All freestanding signs are permitted.
(2)
Maximum Number by Sign Type.
a.
Single-Tenant Development Sign. One (1) freestanding sign is permitted per lot. One (1)
additional freestanding sign is allowed for corner or double-fronted lots.
b.
Multi-Tenant Development Sign. One (1) double-faced or two (2) single-faced signs
is/are permitted per development entrance (but shall be placed at to no more than two (2)
entrances).
c.
Industrial Subdivision Sign. One (1) double-faced or two (2) single-faced signs is/are
permitted per subdivision entrance (but shall be placed at to no more than two (2)
entrances).
(3)
Maximum Area. Seventy-two (72) square feet per face.
(4)
Maximum Faces. Two (2) faces per sign.
(5)
Maximum Height. Eighteen (18) feet. Where a sign is located within 500 feet of the right-of-way
of Interstate 26 the maximum height shall be 75 feet (as measured from the road grade of the
interstate).
B.
Attached Signs. 
(1)
Sign Type. All attached signs are permitted.
(2)
Sign Clearance. Any attached sign projecting 12 inches from a wall shall have a minimum nine
(9) foot clearance over sidewalks and 14 foot clearance over roads, drives and alleys (no
projection is allowed in any right-of-way).
(3)
Maximum Area. Ten (10) percent of any wall area fronting a road and/or building facade, up to a
maximum of 250 square feet.